From burst pipes to basement floods, our crews arrive in under 60 minutes with truck-mounted extraction and industrial drying equipment. Every service below is available 24/7 across Chicago and the suburbs.
24/7 — 312-900-8096Full-service restoration from the first extraction pass to the final repair. We remove standing water, dry the structure to verified moisture levels, sanitize affected areas, and rebuild damaged materials — returning your Chicago property to pre-loss condition with one call and one crew.
Water doesn't wait for business hours, and neither do we. Our emergency line is answered 24/7, and a certified crew is dispatched immediately — typically on site within 60 minutes anywhere in Chicago. The faster extraction starts, the less damage spreads and the lower your repair cost.
Thorough cleanup after any water intrusion: debris removal, surface cleaning, antimicrobial treatment, and disposal of unsalvageable materials. We leave the affected area clean, sanitized, and ready for drying and repair — not just visibly dry, but safe for your family or tenants.
Standing water is removed fast with truck-mounted extractors and submersible pumps rated for everything from an inch in a living room to a fully flooded basement. Rapid extraction is the single most important step in limiting structural damage and preventing mold growth.
Flooding brings contaminated water, soaked materials, and hidden moisture inside walls and under floors. We extract, remove damaged drywall and insulation, sanitize every affected surface, and dry the structure completely — documenting each step for your insurance claim.
When floodwater enters your property, every hour counts. Our emergency flood crews arrive with pumps, extractors, air movers, and dehumidifiers to stop the damage from spreading. We stabilize the property first, then build the full drying and restoration plan on the spot.
Mitigation is the race to stop damage from getting worse: extraction, moisture mapping, controlled demolition of unsalvageable materials, and industrial drying. Acting within the first 24 hours often means the difference between drying a structure and rebuilding it.
Surface drying isn't enough — moisture trapped in framing, subfloors, and wall cavities causes rot and mold weeks later. We use moisture meters, thermal imaging, and commercial-grade dehumidifiers to dry your structure to verified standards, with daily readings logged until it's done.
Water weakens framing, subfloors, joists, and load-bearing materials. Once drying is verified, our team repairs or replaces compromised structural components to code — so your property isn't just dry, it's sound. We coordinate the full repair so you deal with one contractor, not three.
Not sure how far the water went? Our inspectors use moisture meters and thermal imaging to map every affected material — including moisture hidden behind walls and under floors. You get a clear picture of the damage, a written scope of work, and honest pricing before anything begins.
A detailed, documented evaluation of your water loss: source, category of water, affected materials, and required drying and repair steps. Our assessments give you and your insurance adjuster a shared, accurate picture — which keeps claims moving and prevents surprise costs later.
Insurance claims live or die on documentation. We photograph and catalog all damage, log moisture readings throughout the drying process, and compile a complete loss record with itemized estimates. Proper documentation protects your claim and speeds up your settlement.
A burst pipe can release hundreds of gallons in hours, soaking walls, floors, and ceilings. We shut down the source, extract the water, and dry the structure aggressively before secondary damage sets in. Chicago winters make burst pipes common — our crews are ready around the clock.
Whether it's a corroded supply line or a pipe cracked by freezing, we handle the full cleanup: water extraction, damaged material removal, sanitization, and complete structural drying. We also identify the failure point so your plumber can make a lasting repair.
Slow pipe leaks quietly saturate drywall, insulation, and framing — often for weeks before you notice. We locate the full extent of the moisture with meters and thermal imaging, remove damaged materials, treat for mold risk, and dry the cavity completely before repairs.
A broken main water line can flood basements and crawl spaces fast, and often involves contaminated ground water. We extract the water, sanitize affected areas, and dry the structure to verified levels. Available 24/7 because water line breaks don't wait for morning.
Slab leaks release water beneath your foundation, wicking up into flooring, baseboards, and walls. We map the moisture, dry affected materials with specialized equipment, and repair water-damaged finishes — working alongside your plumber once the leak itself is located and fixed.
From supply lines to drain lines, plumbing leaks cause hidden damage that grows more expensive by the day. We extract standing water, open and dry wall cavities, treat for microbial growth, and restore finishes — stopping a small leak from becoming a major rebuild.
Musty smells, warm floor spots, or unexplained water bills often mean a hidden leak. Using thermal imaging, acoustic detection, and moisture mapping, we pinpoint the source without tearing your home apart — then dry and repair only what's actually affected.
A failed water heater can dump 40 to 80 gallons onto your floor, soaking everything nearby. We extract the water, dry the surrounding structure and adjacent rooms, and repair damaged flooring and drywall. Fast response keeps a utility-room leak from spreading through the whole level.
Dishwashers, washing machines, and refrigerators leak slowly and silently, rotting subfloors and feeding mold under cabinets. We remove the damaged materials, dry the hidden cavities, treat for mold, and restore the area — and we'll tell you honestly what can be saved.
Clogged condensate lines and leaking air handlers cause slow, widespread water damage — often inside ceilings and closets. We dry and restore the affected structure, repair damaged drywall and insulation, and identify the HVAC fault so it doesn't happen again next season.
Chicago basements flood from storms, sump pump failures, and sewer backups. We pump out the water, remove unsalvageable materials, sanitize all surfaces, and dry the space with commercial dehumidifiers. We also assess why it flooded so you can prevent the next one.
Water in a crawl space goes unnoticed while it rots joists and breeds mold that circulates into your living space. We extract the water, dry and treat the structure, remove contaminated insulation, and recommend drainage or vapor barrier solutions to keep it dry permanently.
Your home deserves a crew that treats it like their own. We handle houses, condos, and apartments across Chicago — from single-room leaks to whole-floor floods — with careful protection of your belongings, clear communication, and complete restoration from extraction to final paint.
For offices, retail, and multi-family buildings, downtime and displaced tenants cost money. We scale crews and equipment to the size of the loss, work in phases to keep operations running, and provide the documentation property managers and insurers require. One call mobilizes it all.
Wet drywall wicks moisture upward, loses strength, and grows mold inside the cavity. We cut out damaged sections cleanly, dry and treat the framing behind them, then hang, tape, finish, and paint new drywall to match — leaving no trace the damage ever happened.
Hardwood, laminate, tile, and carpet each respond differently to water. We assess what can be dried in place — often saving hardwood with specialty drying mats — and what must be replaced, then restore your floors to pre-loss condition with matched materials and professional installation.
Wet insulation never dries properly in place — it compresses, loses R-value, and becomes a mold incubator inside your walls. We safely remove saturated insulation, dry and treat the open cavity, and install fresh insulation so your walls are dry, healthy, and efficient again.
Chicago storms drive water through roofs, windows, and foundations all at once. Our storm crews handle the full scope: extraction, board-up and tarping where needed, debris removal, structural drying, and repair — with priority dispatch when severe weather hits the region.
Wind-driven rain finds every weak point: window frames, siding seams, door thresholds. We trace the intrusion path with moisture mapping, dry the hidden damage inside walls, and repair affected materials — plus document the entry points so the envelope can be properly sealed.
Roof leaks travel along rafters and show up far from the actual hole, soaking insulation and ceilings along the way. We locate the true source, dry the attic and ceiling structure, repair water-damaged materials, and coordinate tarping until your roofer makes permanent repairs.
Describe your situation and we'll give you an honest assessment over the phone — free. Crews are on call 24/7 with under 60-minute arrival across Chicago.
Call 312-900-8096